Geeetech Superplate 3D Printer Glass Platform with High-performance Microporous Coating, 220 * 220 * 4mm for 3D Printer Heatbed

15 Customer reviews

£ 16 27

Style Name:Glass Platform


Product Description

  • 1. Excellent adhesion: Superplate is coated with micropores, having strong adhesion during printing.
  • 2. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
  • 3. Easy to clean with water or alcohol.
  • 4. Easy to remove your print by hand or with a scraper.
  • 5. Size: 220*220*4mm

Geeetech Superplate comes with high-performance microporous coating. Compared with aluminum plate, this kind of build platform is of better adhesion and flatness and easy to take prints off by hand or with the help of a scraper.

Size: ** mm
Net weight: 7g
Shipping weight: 600g

Customer reviews(15)

Write Review
D. White
14 June 2018
14 July 2018
What a difference! I went from having to use hairspray and an 8mm brim to nothing. I have a Geeetech Acrylic i3 Pro and the plate I bought was the full 220mm x 220mm and I thought I might have to drill it to get it to fit but I made some clips for the corners and as I'm using a 3D-Touch self levelling sensor. I did away with the spring/screw bed levelling fittings and now have the Plate direct to Heatbed with a 6mm space for the Y-Axis carriage screws. Even if you don't have a Geeetech, I'd recommend this if it will fit your printer.
Just let the plate cool to 40 or less before you try to remove your parts as it will be easier and you won't risk scratching the plate.
31 July 2018
Bought it by mistake, I thought it was a tape kind of bed and not a glass bed. Was very disappointed when I received the package. I was very wrong to be. That glass bed is amazing. The print sticks to it enough that it doesn't move during print, but with just the correct amount that you can remove the print with your hand, no need for a spatula or anything.
Is not the same size as my flashforge dreamer bed (it's a bit more deep and a tiny bit less wide), but it fits none the less. Don't regret it whatsoever
Gurpreet Singh
13 June 2018
Decent plate with good stickiness to prints. Also had advantage of a bit bigger size than my heated. This now covers all the heatbed. Only problem I had was I had to cut corners of this plate to fit. But if your heatbed size is bigger then you will be ok
Mike Jones
21 June 2018
This has helped get rid of having to use Pritt stick on the glass platform that comes in the box with their printers. Has made a huge difference to the printing of the first layer. Would definitely recommend
Aj Coles
4 August 2018
What a great product. I've only just begun my 3d printing journey and was having problems with adhesion to the print bed. Saw this and thought I'd give it a try. My problems are now solved, at least that one is!
Now just print directly onto the glass plate - simple!
Jon A
28 June 2018
This bed improved my prints a lot, previously the prints lifted constantly and I was having to use glue and hairspray to make it stick which I no longer have to do, if you bare getting this for the i3 pro you will need countersink screws to ensure it fits on the hotbed.
George Skulski
29 September 2018
This product was superb for adhesion of print to the baseplate. Regrettably, my printer suffered a printhead clog. After that I found it completely impossible to remove the first few layers of print from the baseplate! Such a pity as I was excited by the adhesion when my print started in view of the problems I had previously.

Back to top